Your SCADA system as it really runs

Not as it was designed or documented

TrueState is a SCADA security assessment from United Systems. Your SCADA system runs the equipment your customers depend on: pumps, valves, tanks, and breakers. Security teams also call it operational technology (OT).

Our TrueState assessment shows what equipment you have, how it’s connected, and where it’s vulnerable. And you’ll receive a three-year roadmap to fix the problems in order of risk.

Why SCADA systems are at risk

SCADA systems were built to run reliably for decades in isolation. Today they connect to office networks, vendors, and the internet, often without the protection those connections require.

  • Old equipment that’s hard to update. Controllers often run for 15 years or more on their original software.
  • No login required. Many control systems accept commands from any device on the network.
  • No internal walls. On most SCADA networks, one compromised device can reach everything else.
  • Open doors from outside. Cellular modems, vendor connections, and internet-facing equipment give attackers a way in.

A TrueState assessment addresses these challenges.

Isometric illustration of a utility facility protected by security personnel and a shield with a keyhole, representing physical security and cybersecurity protection.

Utilities are already being targeted

In July 2026, attackers changed passwords on internet-exposed controllers and locked operators out. Some towns issued boil-water notices and ran their systems by hand. CISA later reported that over 30 water systems in Minnesota were targeted, part of more than 100 water systems targeted across 12 states. (Cybersecurity Dive)

The company shut down its customer portal and paused billing after a cyberattack in October 2024. (TechTarget)

Intruders broke into the software that controls a water tank in January 2024. The tank overflowed for 30 to 45 minutes. (Spectrum News)

In November 2023, an Iran-linked group took over a controller at a water booster station. CISA said poor password security and internet exposure likely made it possible. (Claroty)

A Chinese state-linked group stayed inside a small electric and water utility’s network for more than 300 days (February-November). They entered through a firewall that was missing a security update. (SecurityWeek)

The pattern is consistent. Most victims were small or mid-sized utilities, and most attacks used basic openings like internet-facing equipment and weak passwords. In Minnesota, one town of about 1,700 people had its water plant taken fully offline (Security Affairs).

What’s more, IBM’s 2026 study of 602 organizations put the average cost of a breach in the energy sector at $5.2 million (IBM).

TrueState vertical logo

What the assessment covers

  1. Equipment inventory. We identify every device on your SCADA network, its software version, and its connections.
  2. Network review. We map how your control network is laid out and where it touches your office network.
  3. Vulnerability check. We look for weak settings, known software flaws, and factory-default passwords.
  4. Access review. We examine every way into the system from outside: remote access, vendor links, and internet exposure.
  5. Standards scoring. We score your system against recognized security standards.

The standards we score against

TrueState scores every system against IEC 62443, the international standard for securing industrial control systems. We also map your results to the framework used in your sector:

Water & Wastewater

NIST Cybersecurity Framework

Electric

NERC CIP

Natural Gas

TSA pipeline security plans (CAP & CIRP)

TTrueState measures where you stand against these standards. It’s not a certification.

What you’ll receive

An assessment report
  • A summary written for managers and board members
  • A complete inventory and map of your SCADA network
  • Every vulnerability, ranked by risk
  • Recommended fixes, in priority order
A scorecard

Your system is scored in the seven areas IEC 62443 measures:

  1. Who can log in
  2. What each user is allowed to do
  3. Whether systems can be tampered with
  4. Whether data stays private
  5. Whether the network is divided into protected zones
  6. How quickly you detect and respond to a problem
  7. Whether the system stays available when you need it
A three-year roadmap

Each fix is listed in order, with an approximate timeframe.

 

Year What happens What you receive
1 Full assessment against IEC 62443 and your sector’s framework Assessment report, scorecard, and three-year roadmap
2 Re-assessment against your roadmap Updated scorecard showing measured progress
3 Re-assessment against your roadmap Updated scorecard and a plan for what comes next

 

Every re-assessment is measured against your original results. Your managers, board, and regulators can see the progress in numbers.

Fixing what we find

 

Our assessment tells you what to fix and in what order. The repair work is a separate project with its own price.

But rest assured your roadmap belongs to you. You can hire United Systems to do the work, or you can take the roadmap to another company.

Why United Systems?

 

 

  • We know SCADA and OT. Our experience with industrial control systems, combined with the industry-recognized IEC 62443 framework, allows United Systems to deliver consistent, thorough security assessments across water, gas, and electric utilities.
  • We know utility IT. We manage office networks for many utilities and municipalities, so we understand how your IT and SCADA systems need to work together.
  • We know security. Our recommendations are practical, prioritized, and written to keep your operation running.

Frequently Asked Questions

What is a SCADA system?

SCADA, which stands for supervisory control and data acquisition, is the system that monitors and controls a utility’s physical equipment, such as pumps, valves, tanks, and breakers.

What is a SCADA security assessment?

A SCADA security assessment is a structured review of the system that controls your physical equipment. It identifies what’s on the network, how it’s connected, and where an attacker could get in. This is precisely what a TrueState assessment from United Systems is for.

What is the difference between OT and SCADA?

Operational technology (OT) is the broad term for technology that controls physical equipment. SCADA is the most common type of OT at a utility. Many people use the two terms to mean the same thing.

We are a small utility. Are we really a target?

Yes. Attackers scan the internet for exposed equipment and don’t check the size of the utility or municipality first. In July 2026, one of the hardest-hit Minnesota systems served about 1,700 people.

Is TrueState a compliance certification?

No. TrueState scores your system against IEC 62443 and your sector’s framework. It shows where you stand and what to fix. It does not certify compliance.

How is this different from the free CISA scan?

CISA offers utilities a free scan of equipment that’s visible from the internet. It’s worth doing.

But that scan doesn’t reach inside your network. TrueState inventories every device, reviews how the network is built, and scores your whole system.

Does the assessment include fixing the problem?

No. You receive a prioritized roadmap. Repairs and remediation are separate projects, which United Systems or another company can complete.

Will the assessment disrupt our operations?

No. United Systems works alongside your team to review your systems and how they function. It’s an audit, so there’s no downtime and no disruption to daily operations.

How long does the first assessment take?

It depends on the size of your utility. For most utilities, the first TrueState assessment takes 4 to 10 business days.

What does TrueState cost?

Pricing for TrueState depends on the number of devices on your control network. Please contact United Systems for a quote.

Does TrueState work for gas and electric utilities?

Yes. IEC 62443 applies to any industrial control system. We map your results to NERC CIP for electric utilities and to TSA pipeline security plans for gas.

Do we have to be a Managed IT customer with United Systems?

No. TrueState is available as a standalone product from United Systems.

Last updated: November 2026

Ready to reduce friction across operations?

Coordinate billing, payments, customer service, metering, work orders, and operational workflows through utility-focused technology and support services. Talk with our team to learn how United Systems supports utilities through technology, operational services, metering, customer service, and workflow management.

United Systems and Software
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.